Now add your projects on Internet by using this cheap WIFI Serial device...!!

ESP8266 - Serial WIFI Module 802.11 B/G/N

 

 Description:

Just created! With just simple soldering work, you can get this low cost Serial WiFi module to connect any of your projects to the Internet. Simple to use with a 4×2 male header and a simple 3 wire serial communication at 115200. Connect to wireless networks, act as a hotspot or a bridge, serve websites, and download data from the internet. You must use at 3.3v. Just in Rs.300/- below...!!

Features

1. Support 802.11 B/G/N
2. Communication range up to 100 yards depending on environment.
3. Standard 3.3VDC operation with 5V compatible I/O.
4. Standard 3 wire (TXD/RXD/GND) serial communication (idle high) at 115200/8/N/1.
5. Standard 0.1″ (2.54mm) 4×2 header. (Other form factor available)
6. Upgradeable firmware.
7. Three mode of operations: Client/Access Point/Both Client and Access Point.
8. Support all major security schemes: OPEN/WEP/WPA_PSK/WPA2_PSK/WPA_WPA2_PSK.
9. Support both TCP and UDP communication.
10. Working as TCP/UPD server supports up to five (5) connections.
11. Working as station can connect up to 5 TCP/UPD servers. The ESP-01 can connect to all standard non-SSL websites in the world.

Pinout

1. GND – ground
2. UTXD – serial transmit (idle high)
3. URXD – serial receive (idle high)
4. VCC – 3.3VDC
5. CH_PD – must pull high or just connect to VCC
6. RST – must pull high or just connect to VCC
7. GPIO0 – must pull high or just connect to VCC
8. GPIO2 – must pull high or just connect to VCC

CLICK HERE FOR PURCHASE (FROM ifuturetech.org)

Can be Interfaced with : Raspberry Pi, Arduino, 8051 and so on...

Can be programmed with "PYTHON" Programming. 

Demo of Interfacing tutorial coming soon...!! 

 

Must connected to the blog for further information.